{"id":3213,"date":"2026-10-24T11:19:19","date_gmt":"2026-10-24T08:19:19","guid":{"rendered":"https:\/\/img-group.com.tr\/solar-tutucu-profilleri\/"},"modified":"2026-10-24T21:13:29","modified_gmt":"2026-10-24T18:13:29","slug":"solar-mounting-clamps","status":"publish","type":"page","link":"https:\/\/img-group.com.tr\/en\/solar-mounting-clamps\/","title":{"rendered":"Solar Mounting Clamps"},"content":{"rendered":"

IMG GROUP \u00b7 ALUMINIUM PROFILES<\/p>

\"IMG<\/figure>

Solar mounting clamp profiles are aluminium connection components used to secure photovoltaic modules to mounting rails. Mid clamps, end clamps and roof connection parts are selected together for the module layout and installation surface.<\/p>

Applications and Technical Selection<\/h2>

The clamp connects the module frame to the rail. Selection requires frame height, contact surface and rail channel geometry to be assessed together. Mid and end connections have different functions, so the material schedule must reflect row arrangements as well as the total module count.<\/p>

Mid clamps secure adjacent modules at their shared fixing positions. End clamps are used at the outer edges of panel rows. Catalogue variants with the same product name should not be assumed interchangeable. Follow the module manufacturer\u2019s permitted clamp zones and the mounting system details.<\/p>

Standing seam roof components connect the supporting structure to the roof detail. Seam geometry and roof covering properties affect the connection solution. Rail nuts must fit the rail channel and match the selected fasteners. The clamp, nut, bolt and rail should be assessed as a complete connection rather than selected by name alone.<\/p>

Two arrays with the same number of panels may require different quantities of mid and end clamps if their rows are arranged differently. Mark every fixing point on the panel layout and compare the resulting schedule with the system installation instructions.<\/p>

When adding components to an existing system, check the actual rail channel and module frame dimensions. Similar looking clamps may have different contact areas or connection geometry. Define the extrusion, cut piece length and associated fasteners separately to simplify quotation comparisons and site checks.<\/p>

Product Options and Catalogue Information<\/h2>
Profile name<\/th>Catalogue weight value<\/th><\/tr><\/thead>
Mid clamp<\/td>0,599<\/td><\/tr>
End clamp<\/td>0,613<\/td><\/tr>
End clamp<\/td>0,667<\/td><\/tr>
End clamp<\/td>0,721<\/td><\/tr>
End clamp<\/td>0,743<\/td><\/tr>
Standing seam roof \u2013 L<\/td>2,141<\/td><\/tr>
Seam block<\/td>2,132<\/td><\/tr>
Strip profile<\/td>0,379<\/td><\/tr>
End clamp<\/td>0,517<\/td><\/tr>
Mid clamp<\/td>0,482<\/td><\/tr>
Double sided edge clamp<\/td>0,618<\/td><\/tr>
Rail nut<\/td>0,371<\/td><\/tr><\/tbody><\/table><\/div>

Source: Aluminium Profiles catalogue. Weight values are reproduced as listed; the document does not specify their unit. Repeated names may refer to different variants. Confirm section dimensions and weights against technical drawings before ordering.<\/small><\/p>

Preparing Your Enquiry<\/h2>

Provide the following information with the project drawings. List profiles and accessories separately to define the supply requirement.<\/p>